> 2012 Twin Peaks Phase 3 Drilling

> 2009 - Twin Peaks Phase 1 and Phase 2 Drilling Program Video

video 1

> Corporate Overview


USCorp and Subsidiary USMetals, Inc. Release Summary of Recently Completed Drilling Program

09/12/2012 | Press Release

LAS VEGAS--(BUSINESS WIRE)--USCorp (OTCMarkets: USCS.PK) today announced that USCorp has received the Geologist report regarding the 2011-2012 drilling program at the Twin Peaks Project site. The report has been reviewed by USCorp’s Mining Consultant, Edwin Arbar, who has provided the company with an analysis that is summarized below:

Project Description and Contractors

Arizona Gold Corporation (“AGC”) contracted Pincock, Allen & Holt (“PAH”), an internationally known consulting firm, as AGC’s Project Consultants and Managers. The original PAH Chief Geologist, Barton Stone, began reconnoitering the Twin Peaks project and surrounding areas. Barton Stone then outlined a 13,000 feet drilling program to be directed at five (5) high interest areas of mineralization. Mr. Stone also recommended taking samples at five (5) foot intervals of cored rock. The five (5) foot sample interval for assay tests is a Mining Industry Standard.

The primary operator with total Project responsibility during the Phase 3 Drilling program was Arizona Gold Corporation (“AGC”). AGC contracted Michael Krokosz at the behest of PAH’s Geologist Craig Horlacher. Mr. Horlacher replaced Mr. Barton Stone who was the previous and first PAH Geologist on the Phase 3 contract at Twin Peaks. Mr. Stone was later reassigned by PAH before drilling was initiated.

The newly appointed PAH Chief Geologist, Craig Horlacher, formulated a sampling protocol for this project. Samples were to be taken at one (1) foot intervals and a portion of the split sample was sent to Arizona Assay Laboratory (“AAL”) to be fire assayed for gold and silver. One-half of each sample was kept by AGC in a secured site at the project office in Wickenburg, Arizona, for future reference. The assayer was instructed to retain all “pulp” material for each sample sent to them for processing and assaying. The samples of “pulp” and the remaining one-half of the core samples are now in the process of being re-checked by spectrographic analysis (XRF) for any metal content that may have been missed or inadvertently overlooked by the assay laboratory, AAL.

AGC contracted Boart Longyear Drilling Services (“BLDS”), rated as one of the largest international drilling companies in the mining industry. BLDS was hired to drill at locations thought to be drill targets of ore. PAH and AGC Geologists initially identified five (5) areas as prime locations to intersect precious metal deposits.

AGC initiated Phase 3 drilling program at Twin Peaks on November 9, 2011 in the Hayes Mine area. The objective was to drill alongside and then drill through the Quartz Dike at the Hayes Mine area. PAH has issued positive statements regarding the potential of the Twin Peaks property. PAH stated “Twin Peaks Property has definite upside potential” and continued, “that a potential five million tons, or more of resources reside in the lengthy quartz vein structures…” Recent visits by Geologists and Mining Consults have suggested that the Quartz Dikes are a major part of the structurally controlled mineralization that has occurred at the Hayes Mine and other locations. The Hayes Mine was a prolific mineral producer. The mineral production was not from the Dike itself, but from the footwall area that parallels the Quartz Dike.

Michael Krokosc, AGC Chief Geologist, maintained the “sampling protocol” formulated by PAH Geologist, Craig Horlacher, by taking assay test samples at one (1) foot intervals of cored rock material.


There are several lessons learned from the experience of Phase 3 Drilling Project. Number one is the importance of concentrating on locating and testing when encountering the pathfinder metals, Iron and Iron Oxides, when associated with Quartz Dikes or any other rock structure. Ore has appeared in host rocks such as metagranites and schists that are often associated with the Quartz Dikes. Historical Geology comes into play with the association and relationships of various lithologies, which must be studied and recorded further in greater detail.

Quartz Dikes were formed millions of years ago by migrating magmatic solutions under intense heat and pressures thereby filling some fault systems on Twin Peaks that are now prominent Quartz and Pegmatite Dikes. While some faults were being filled with magmatic solutions, some faults were filled to form Quartz Dikes. The tectonic forces caused crushing, heavy fracturing and folding of existing rock structures that allowed the Hydrothermal (mineralized) waters to penetrate, disseminate and (sometimes) deposit metals throughout the fault/fracture zones. This process sometimes included Quartz Dikes and related dike systems. In other words, mineralization came long after the Quartz Dikes were formed. The mineralization was structurally controlled by fault systems and Dikes of all types (including Pegmatite Dikes).

Since it has been determined that mineralization came AFTER the Quartz Dikes were formed, it is now known that the origin of the mineral waters was probably from a massive detachment fault system located at great depths. Blocks of regional plates passed over each other by tectonic forces related to continental subduction.

Although the Phase 3 drilling project did not produce the number of expected results, the project Geologist and others are confident they know where the Feeder may be located. The Feeder location that fed the ore found and mined at the Crosby, Hayes, Swiss Belle and Glory Hole mines can be better identified.

New, state-of-the-art techniques and scientific instruments will be used by USMetals to capitalize on newly discovered locations as a result of the Phase 3 drilling program where significant gold values were discovered during the program, but not pursued, as the company believes should have been by geophysical surveying and testing to identify the structures where the Phase 3 core driller made a significant gold hit.

Next Steps

A new plan has been put in place to execute a new drilling program based on the planned geophysical 3-D model that will show the gold target(s) including size and depth of the target.

New ASTER satellite photos have recently been obtained for interpretation by a USMetals contractor. The interpretations will zero in on “geo-magnetic” and “mineral alteration” areas with readings that are then interpreted to identify target areas that indicate deep structural features and areas of alteration that are then targeted for geophysical (sub-surface) exploration.

A geophysical crew will conduct magnetic (magnetometer), VLF (very low frequency), and I. P. (Induced Polarity) surveys in the ASTER targeted areas that will ultimately produce 2-D and 3-D models showing specific locations as drill targets. These scientific procedures (previously unused) will eliminate reliance on visually targeted surface mineralization areas that was previously used by AGC during Phase 3 Drilling Project to locate the drill holes.

The geophysical tests are capable of showing details of sub-surface geological structures up to one thousand (1,000) feet (or more) below surface. USMetals has integrated this new technology for the next phase by employing state-of-the-art technologies previously not used on the Phase 3 drilling project. Newly formulated and patented mineral location Software, NASA satellite technology and complex Electo-Therm computerized systems can now reveal detailed sub-surface geology by sending electrical signals down through solid rock structures to locate Minerals, Oil and Gas.

Robert Dultz, Chairman, President and CEO of USCorp and USMetals, said, “The complete Geologists’ report, including drill location maps and assays, will be made public in the near future; we are continuing to analyze it for the purpose of formulating a more prudent plan going forward as we have a far better understanding today of mineralization on the property. We recognize that this has been a very difficult and long road for the company and its shareholders, but we remain committed to this project and are confident that we can achieve our expectations for this property. I appreciate the thoroughness of Edwin Arbar’s summary which we have excerpted in this press release.”

USCorp is an exploration stage company with gold and silver projects in Arizona and California. Information about USCorp can be found at the company’s website:

SAFE HARBOR STATEMENT UNDER THE PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995: The statements contained in this release which are not historical facts are forward-looking statements that are subject to risks and uncertainties that could cause actual results to differ materially from those set forth in or implied by forward-looking statements. These risks and uncertainties include the Company’s entry into new commercial businesses, the risk of obtaining financing, recruiting and retaining qualified personnel, and other risks described in the Company’s Securities and Exchange Commission filings. The forward-looking statements in this press release speak only as of the date hereof, and the Company disclaims any obligation to provide updates, revisions or amendments to any forward-looking statement to reflect changes in the Company’s expectations or future results.


Robert Dultz, Chairman and CEO or
Martin E. Janis & Company, Inc.
Beverly Jedynak, 312-943-1123

« back to news page